Toby Ricco's Custom Electric Scooter Version 2

Owner	Toby Ricco
Owner's Other EVs	Custom Electric kart Custom Electric Scooter Version 1 Indoor Electric Kart (Made for Rick Gaan) Custom Electric Shifter Kart
Location	Los Gatos, California US ^map
Email
Vehicle	Custom Electric Scooter Version 2
Motor	Briggs and Stratton Etek This scooter is exactly the same as version 1, however I have installed an Etek motor to use my batteries and controller to their full potential.
Batteries	0.00 Volt,
Top Speed	40 MPH (64 KPH) The top speed is somewhere between 35 and 40 mph, which is insane for a neighborhood electric scooter.
Acceleration	Very fast
Range	20 Miles (32 Kilometers) About an hour of driving
Seating Capacity	2 people standing
Curb Weight	120 Pounds (54 Kilograms)
Conversion Cost	$1200
Additional Features	This scooter has wheelied (slightly) on occasion.
The Etek I used was fried so I consider it to be free... My friend and I fixed the motor by re-soldering the tabs which had melted off the commutator. It took two soldering irons to get the metal clips hot enough to melt the solder. No problems with the fixed motor so far... Additional info: I did all the machining using only a saber saw, hack saw, and table router with a special bit for aluminum.